logigate/app/lib/logic
Fabian @ Blax Software d5a9447bf9 BF moving parts: bends that would run over a part or along another signal let go, the rest stays
Hand-placed bends stayed where they were when parts moved, and the router
takes such wires as fixed lines. So a wire to a moved part was joined to
its old bends by a straight piece that could cross that part (into its pin
from the wrong side) or other parts, run along another signal or over
someone else's pin; a part put down on a wire's bends lay right over it;
and wires of the same signal branched off those lines. The arrow keys also
froze picked wires into bends and shifted them even when one end stayed.

Now a drag and the arrow keys move parts the same way (move.ts), always
from where they started. Wires between parts that move together keep
their bends, moved along. A wire to a part that stays keeps the bends on
that side as long as the way through them is clear by the router's own
rules (a cable by its full width) and lets go of the others, which the
router lays out around the parts; a wire a moved part now lies on does
the same. Only these wires are looked at. What shows while dragging is
what stays, and the drop, a plug or latch included, is one undo step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:21:34 +01:00
..
analyze.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
bulk.ts A output panels, and switches, buttons, clocks or lamps combined into one panel 2026-10-21 14:38:59 +02:00
cables.ts A cable straight off a component's pins: from its outputs or into its inputs, in groups like S0–S3 2026-10-21 14:13:24 +02:00
challenges.ts A logigate: NAND-only logic editor and simulator with components, challenges and examples 2026-10-17 12:49:38 +02:00
check.ts A output panels, and switches, buttons, clocks or lamps combined into one panel 2026-10-21 14:38:59 +02:00
compile.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
examples.ts A transistor counts and records, cables, pixels and screens 2026-10-20 19:29:16 +02:00
fit.ts A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways 2026-10-22 18:59:56 +02:00
geometry.ts A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways 2026-10-22 18:59:56 +02:00
labels.ts A output panels, and switches, buttons, clocks or lamps combined into one panel 2026-10-21 14:38:59 +02:00
latch.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
move.ts BF moving parts: bends that would run over a part or along another signal let go, the rest stays 2026-10-26 18:21:34 +01:00
ops.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
panels.ts R panel rows editor: drag to reorder, add above or below, gaps you can see, no folded settings 2026-10-23 12:59:16 +02:00
progress.ts A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways 2026-10-22 18:59:56 +02:00
project.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
puzzles.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
routing.ts BF moving parts: bends that would run over a part or along another signal let go, the rest stays 2026-10-26 18:21:34 +01:00
search.ts A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging 2026-10-21 13:26:59 +02:00
sim.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
storage.ts A main menu: free play, campaign, challenges and leaderboard over a circuit that builds itself 2026-10-22 12:22:35 +02:00
types.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
wide.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
wires.ts A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging 2026-10-21 13:26:59 +02:00