Hand-placed bends stayed where they were when parts moved, and the router
takes such wires as fixed lines. So a wire to a moved part was joined to
its old bends by a straight piece that could cross that part (into its pin
from the wrong side) or other parts, run along another signal or over
someone else's pin; a part put down on a wire's bends lay right over it;
and wires of the same signal branched off those lines. The arrow keys also
froze picked wires into bends and shifted them even when one end stayed.
Now a drag and the arrow keys move parts the same way (move.ts), always
from where they started. Wires between parts that move together keep
their bends, moved along. A wire to a part that stays keeps the bends on
that side as long as the way through them is clear by the router's own
rules (a cable by its full width) and lets go of the others, which the
router lays out around the parts; a wire a moved part now lies on does
the same. Only these wires are looked at. What shows while dragging is
what stays, and the drop, a plug or latch included, is one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A jump is drawn once more over every line, so a cable that arches over
another is never hidden under it, whatever order they are drawn in. Cable
labels sit on the longest stretch no other line crosses.
The circuit's name in the top bar opens what can be done with it: tidy
its wires or every circuit's, design its box, duplicate, delete, print,
export SVG, publish as a puzzle. The This panel keeps what the circuit is:
its health, its numbers (the transistors tile opens their breakdown), its
truth table and how it looks as a part. Unused components are a tab of
the Components list in the parts bar, with a delete button on each.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Parts are walls with a margin: a line only touches a part where it ends on
its pin. When the usual route and its alternatives are blocked, a search
of the grid around the parts finds the way. Cables count as wide as their
sleeve, so they keep clear of each other. A further wire or cable of a
signal branches off the lines already laid, and cables of one signal are
drawn as one that splits. At crossings the thinner line jumps over the
wider one, as wide as it needs (vertical ones sideways); cables hop with
every line inside. Tidy every circuit lays out all circuits in one go.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Each row is one line: a grip to drag it, its colour (click for the next),
its name, switch / button / clock as three icons, its key (or Hz for a
clock), remove. Pointing between two rows offers to add a row there or
more or less space; empty rows show as that much dashed space. Alt + up
or down in a name moves the row. Rows keep their wires when moved.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A bubble on a lamp or output pin now shows on it. The truth table, Check,
puzzle scores and gate detection read what an output puts out after its
bubble (they read the raw wire, so a bubble on an output was ignored), and
rows of an output panel count as outputs there (they always read 0).
Right-click on an input pin offers to invert it, for desktops that take
Alt+click for themselves.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Combining switches, buttons, lamps or outputs into a panel, and merging
panels, puts the rows right under each other (space 0). Tab in the last
row's name of a panel, or the last line of a connector type, adds the
next one once it is filled in. The bottom bar's lists open centred above
the pointer. The top bar keeps the width it has with both panels open,
centred, so it no longer grows and shrinks with the panels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A project keeps connector types: a name, a colour and lines that run
out -> in or back. Made, edited and deleted (once unused) from the
parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
on the inner side plus a cable pin to pass the whole cable on to a
part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
compiler joins line by line, forward and back, at every depth. Ports
of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
takes them out and in from the side they face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logigate opens on a title screen. Continue, Free play (your own projects),
Campaign (progress and what is next), Challenges (every challenge and the
puzzle of the week in one Challenges project), Leaderboard (the best ten of
this and earlier weeks, your place, your records), Settings. Arrow keys,
Enter and Esc work through it; links still open straight into the editor.
Players can name themselves on the leaderboards. The logo in the editor
leads back to the menu.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right click a component (or its settings): "Cable from outputs" / "Cable into inputs" with the pin groups it has (A0–A3, B0–B3, S0–S3) or all of them
- The cable end plugs onto those pins, the other end waits a few squares away with their names; drop it on the next part's pins and it plugs in there
- Also for input panels (rows out) and hex displays
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Select several lamps, output pins, switches or gates: every run of free pins they fit on (nearest parts first) shows as a green box; pointing along it picks the pins (S0+S1, S1+S2, ...) with a preview, a click wires them all top to bottom
- "Wire them all to" lists those fits, nearest first; the old pick-any-part stays under "Any part"
- Dragging a part so a free pin lands on (or a square from) a pin it can join shows a green ring and connects on drop; Alt places it without connecting
- A cable end only plugs in by itself when all its wires sit on the part; a name a part covers is hidden
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A free bundle or split has no box any more: each wire bends straight into its own lane of the cable, lit and coloured like the wire; a dashed outline shows on hover to grab it
- A wire's name shows next to a free end only when the part at the other end doesn't show it already (a switch or lamp of that name, a component pin)
- Names no longer widen a cable end, so its pins never move
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
the sources on their middle row, right before the targets on theirs, so
the wires keep their flow; backwards wires get a backwards cable, and an
end steps aside when a part is in the way. "Place the ends yourself…"
(Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
the cable between them stays.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A box that touches no parts selects every wire it crosses, so dragging
across the wires between parts marks them for bundling. Right to left
(green box) selects everything touched, parts and wires; left to right over
parts keeps selecting only wires fully inside, so Delete stays safe.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Select wires (or a box of parts and wires), "Bundle into cable…" or
Ctrl+G, then click where the cable starts and where it ends, with a
preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
has its own colour in the cable and bundle/split settings. Wide cables
are clickable across their width; the width mark sits above the ribbon.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When a target sat level with another wire's source (Y3 next to S2), the
column order counted that as free, and ties went to the leftmost column:
S3 stepped left of S2, its last run shared S2's row, and the overlap pass
pushed it onto a side lane with a jog before the pin. Now a shared row
costs more than a crossing, ties keep top-to-bottom order, and a tidy
route that would still run along another signal goes to the usual router.
Tests: the reported layout, and no shared lines in tidy mode for every
example circuit.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Pins list rows used the class "pin", which the canvas styles as
unclickable: renaming and focusing pins did nothing. Renamed the class.
- One line per entry; click the value to flip a switch, hold for a button;
panel rows framed under their panel.
- Drag one wire from a selected part to another part: all selected parts
connect to its next pins in order; "Wire them all to" in the bulk panel.
- Both side panels fold to an icon strip ([ and ]), remembered per browser.
- Zoom out until the whole circuit fits (further for bigger circuits); grid
dots hide when they would be too dense.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Tidy wiring orders all wires entering one column together and lays
them out as one compact staircase a grid step apart, sliding only
within that gap to avoid running along other signals. Separate
bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
from the truth table) take 2 to 16 inputs. The wide version is a
balanced tree of the two-input gate, so transistors count honestly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Campaign projects start with NAND only; challenges open along a
dependency chain, each solution becomes a usable part, and basic parts
unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
The server re-runs the checks on submitted solutions, counts their
transistors and keeps each player's best; the board shows a histogram
and your place. A generated puzzle of the week for everyone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Writes go to a flushed temporary file and are renamed into place; the last
intact version stays as .bak and reads fall back to it, so a power cut
never leaves a damaged save. Same file format as before.
- Savegames per account project (newest 30, one per day for 90 days), kept
before restores and deletions; deleted projects restorable for 30 days.
Projects dialog: savegames per project and "Recently deleted".
- Daily gzip backup of data/ into backups/ (14 newest + monthly), restore
script scripts/restore-backup.mjs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>