logigate/app/lib/logic
Fabian @ Blax Software 049f84eb64 BF split ports: no wire against the cable, pins that stay put, lines kept on unpack
A wire dropped on a socket with a cable in it only takes a line coming
out; the lines going in are the cable's, so it no longer drives one
against the cable. Wired by hand anyway, the check calls that an error,
like a signal sent by two parts. A line going in with neither a wire nor
a cable gets the usual "not connected (reads 0)" warning and marker.

While a wire is drawn over a socket it ends on the socket, where it goes
when let go, not on the pin below. Splitting or joining a port no longer
moves the pins on the other side of the box. Pins on their usual edge
come first, so a wire dropped on the box body takes those, and the cable
button only offers pins whose cable end sits outside the box.

Unpacking a component joins wires on its split lines to the parts that
used the line inside; wires that had nowhere to go are counted in a
notice. Docked panels line up with the moved ports when a project is
opened, not at the next edit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:38:32 +01:00
..
analyze.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
bulk.ts A output panels, and switches, buttons, clocks or lamps combined into one panel 2026-10-21 14:38:59 +02:00
cables.ts BF split ports: no wire against the cable, pins that stay put, lines kept on unpack 2026-10-26 18:38:32 +01:00
challenges.ts A logigate: NAND-only logic editor and simulator with components, challenges and examples 2026-10-17 12:49:38 +02:00
check.ts BF split ports: no wire against the cable, pins that stay put, lines kept on unpack 2026-10-26 18:38:32 +01:00
compile.ts A ports on top of the box, split into lines to wire by hand 2026-10-26 18:08:27 +01:00
examples.ts A transistor counts and records, cables, pixels and screens 2026-10-20 19:29:16 +02:00
fit.ts A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways 2026-10-22 18:59:56 +02:00
geometry.ts BF split ports: no wire against the cable, pins that stay put, lines kept on unpack 2026-10-26 18:38:32 +01:00
labels.ts A ports on top of the box, split into lines to wire by hand 2026-10-26 18:08:27 +01:00
latch.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
ops.ts BF split ports: no wire against the cable, pins that stay put, lines kept on unpack 2026-10-26 18:38:32 +01:00
panels.ts A ports on top of the box, split into lines to wire by hand 2026-10-26 18:08:27 +01:00
progress.ts A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways 2026-10-22 18:59:56 +02:00
project.ts A ports on top of the box, split into lines to wire by hand 2026-10-26 18:08:27 +01:00
puzzles.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
routing.ts A latch parts onto each other: pins touching, no wires, moving together 2026-10-23 15:34:36 +02:00
search.ts A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging 2026-10-21 13:26:59 +02:00
sim.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
storage.ts A main menu: free play, campaign, challenges and leaderboard over a circuit that builds itself 2026-10-22 12:22:35 +02:00
types.ts A ports on top of the box, split into lines to wire by hand 2026-10-26 18:08:27 +01:00
wide.ts BF inverted inputs: lamps and outputs show the inverted value, and checks read it 2026-10-23 12:27:12 +02:00
wires.ts A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging 2026-10-21 13:26:59 +02:00