Commit Graph

19 Commits

Author SHA1 Message Date
Fabian @ Blax Software 1be913bd24 A ports on top of the box, split into lines to wire by hand
On a component's box every connector port now sits at the very top of its
side, above the single pins, in auto and hand-drawn boxes alike. A port
can be split on one placed component (its settings or right click: Split
… into lines): right below the socket the box then gets a pin per line,
named after the line, so lines can be wired by hand without an adapter.
Lines going into the component are inputs, lines coming out outputs, each
facing out of its side; a bar in the type's colour ties them to the
socket. A cable still plugs into the socket at the same time. Dropping a
single wire on a socket (or clicking one while connecting) splits the
port and takes the first free line that runs that way. Join … lines
takes the line pins and their wires away again, as one undo step.

A line wired by hand joins the same net the cable's line reaches inside;
a wire and a cable on one line both drive it, and the check says so.
Line pins are left out of the open-input warning, docked panels and
bubbles; docked panels no longer get a row for a port's socket either.
Saved as an optional list on the placed component (splitPorts); without
it a box only has its ports moved to the top.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:08:27 +01:00
Fabian @ Blax Software ad8f6897e0 A latch parts onto each other: pins touching, no wires, moving together
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 15:34:36 +02:00
Fabian @ Blax Software 55bba95098 R panel rows editor: drag to reorder, add above or below, gaps you can see, no folded settings
Each row is one line: a grip to drag it, its colour (click for the next),
its name, switch / button / clock as three icons, its key (or Hz for a
clock), remove. Pointing between two rows offers to add a row there or
more or less space; empty rows show as that much dashed space. Alt + up
or down in a name moves the row. Rows keep their wires when moved.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 12:59:16 +02:00
Fabian @ Blax Software 24bc66f798 R Packed panels, Tab adds rows, flyouts at the pointer, steady top bar
Combining switches, buttons, lamps or outputs into a panel, and merging
panels, puts the rows right under each other (space 0). Tab in the last
row's name of a panel, or the last line of a connector type, adds the
next one once it is filled in. The bottom bar's lists open centred above
the pointer. The top bar keeps the width it has with both panels open,
centred, so it no longer grows and shrinks with the panels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 22:47:38 +02:00
Fabian @ Blax Software 8de4a81678 A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways
- A project keeps connector types: a name, a colour and lines that run
  out -> in or back. Made, edited and deleted (once unused) from the
  parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
  on the inner side plus a cable pin to pass the whole cable on to a
  part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
  compiler joins line by line, forward and back, at every depth. Ports
  of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
  takes them out and in from the side they face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:59:56 +02:00
Fabian @ Blax Software c5b67ee7c1 R saves like a game: one save per project on every device, Load game in the menu, a pause menu, and a lean side panel
- Sync: when two devices changed the same project, the newer save wins
  everywhere and the other becomes a savegame of it (new endpoint to keep
  a savegame without replacing the save), never an "(other device)" copy.
  A first visit keeps its starter unsaved until something changes, and
  the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
  selected (or the project button) opens a pause menu: Resume, Save,
  Save as copy, Load, Settings, How to play, Main menu. The projects
  dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
  duplicate, unlink, delete, more = the right-click menu), only the
  settings that matter for the part; pins, component tools, keys, cable
  and panel options fold away and remember it. X/Y fields removed.
  The Circuit tab folds its component settings, transistor breakdown
  and tools the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:36:17 +02:00
Fabian @ Blax Software 794acad140 A finer component boxes, a regrouped parts list with keyboard search, a real green for wires and cables
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 06:48:42 +02:00
Fabian @ Blax Software 09f945d2c5 A output panels, and switches, buttons, clocks or lamps combined into one panel
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 14:38:59 +02:00
Fabian @ Blax Software b19057b9d8 A cable straight off a component's pins: from its outputs or into its inputs, in groups like S0–S3
- Right click a component (or its settings): "Cable from outputs" / "Cable into inputs" with the pin groups it has (A0–A3, B0–B3, S0–S3) or all of them
- The cable end plugs onto those pins, the other end waits a few squares away with their names; drop it on the next part's pins and it plugs in there
- Also for input panels (rows out) and hex displays

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 14:13:24 +02:00
Fabian @ Blax Software deb94b9d61 BF input panels are component inputs, cable ends plug in more reliably; A merge panels, hex pass-through, design a component's box
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:49:29 +02:00
Fabian @ Blax Software 4d0e32d678 A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:26:59 +02:00
Fabian @ Blax Software 1741631ab0 A cable ends plug straight into parts and show their wire names, custom input panels with keys, colours and spacing
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:51:45 +02:00
Fabian @ Blax Software 29c32026d7 A cables you place yourself, drawn as coloured ribbons
- Select wires (or a box of parts and wires), "Bundle into cable…" or
  Ctrl+G, then click where the cable starts and where it ends, with a
  preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
  sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
  has its own colour in the cable and bundle/split settings. Wide cables
  are clickable across their width; the width mark sits above the ribbon.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:39:54 +02:00
Fabian @ Blax Software 74b257ce6e A right panel in tabs, Pins list, bulk editing, transistor breakdown, Settings dialog
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
  preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
  place (Enter goes to the next), number a whole side from a pattern, flag
  duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
  pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
  and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
  palette, and a per-part breakdown of the circuit. Test: the count equals
  4 x the gates the simulator builds, for every example and wide gate.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 09:29:55 +02:00
Fabian @ Blax Software 5663685505 A compact tidy wiring, pass-through lamps and outputs, gates with up to 16 inputs
- Tidy wiring orders all wires entering one column together and lays
  them out as one compact staircase a grid step apart, sliding only
  within that gap to avoid running along other signals. Separate
  bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
  signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
  from the truth table) take 2 to 16 inputs. The wide version is a
  balanced tree of the two-input gate, so transistors count honestly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:09:23 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 9754ecc0b4 A transistor counts and records, cables, pixels and screens
- Every component shows its transistors (CMOS, 4 per NAND, at every
  depth) in the palette, its settings and the stats. Challenges keep
  the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
  with a width mark; "Bundle into cable" builds one from selected wires,
  "Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
  without gaps. New examples: Screen 4x4 and Demo: Screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:29:16 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00