Commit Graph

11 Commits

Author SHA1 Message Date
Fabian @ Blax Software 7d6b0f8fad A public library of components: publish yours, add everybody's
"Publish to the library…" in the menu on a circuit's name (or Space)
sends the component with every component it uses and their connector
types, under your leaderboard name. The server checks it like any
project, refuses what is missing, inside itself, nested too deep or too
big to run, and counts its transistors and pins itself. Publishing again
from the same browser makes the next version of the same entry; only that
browser holds the entry's key, so only it can update or remove it.
Challenge circuits and puzzle solutions stay private.

The Library (Components in the bottom bar, Space, the main menu) lists
every entry, newest first, searchable by name, description and author,
with a picture of its box, its transistors, pins and what comes along.
Add brings an entry into the open project and starts placing it: what the
project has in exactly that form already is used as it is, the rest comes
with new ids, a taken name gets a number, connector types join one with
the same lines. The This panel says where a component came from and
offers a newer version, which replaces it in place. A campaign only adds
what is built from parts it has earned, and its challenges take nothing
from the library.

Components keep an optional "from" mark; projects without it load and
compute as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:14:46 +01:00
Fabian @ Blax Software ad8f6897e0 A latch parts onto each other: pins touching, no wires, moving together
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 15:34:36 +02:00
Fabian @ Blax Software 8de4a81678 A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways
- A project keeps connector types: a name, a colour and lines that run
  out -> in or back. Made, edited and deleted (once unused) from the
  parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
  on the inner side plus a cable pin to pass the whole cable on to a
  part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
  compiler joins line by line, forward and back, at every depth. Ports
  of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
  takes them out and in from the side they face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:59:56 +02:00
Fabian @ Blax Software 4d0e32d678 A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:26:59 +02:00
Fabian @ Blax Software 1741631ab0 A cable ends plug straight into parts and show their wire names, custom input panels with keys, colours and spacing
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:51:45 +02:00
Fabian @ Blax Software 4fddb8cd34 A one-click cable bundling with smarter placement, BF unlink keeps the cable
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
  the sources on their middle row, right before the targets on theirs, so
  the wires keep their flow; backwards wires get a backwards cable, and an
  end steps aside when a part is in the way. "Place the ends yourself…"
  (Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
  the cable between them stays.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:21:35 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00
Fabian @ Blax Software a241adc94e A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
  labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
  edits save to automatically, others get their own copy. Export, open a
  file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
  branch, double-click selects the whole signal, multi-select, arrow keys,
  colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
  as a volume on edgerealm.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 13:21:49 +02:00
Fabian @ Blax Software 03a4d55834 A logigate: NAND-only logic editor and simulator with components, challenges and examples
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 12:49:38 +02:00