Commit Graph

32 Commits

Author SHA1 Message Date
Fabian @ Blax Software ad8f6897e0 A latch parts onto each other: pins touching, no wires, moving together
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 15:34:36 +02:00
Fabian @ Blax Software b355939581 BF jumps always on top of what they cross; R circuit commands in a menu on its name, the side panel only says what it is
A jump is drawn once more over every line, so a cable that arches over
another is never hidden under it, whatever order they are drawn in. Cable
labels sit on the longest stretch no other line crosses.

The circuit's name in the top bar opens what can be done with it: tidy
its wires or every circuit's, design its box, duplicate, delete, print,
export SVG, publish as a puzzle. The This panel keeps what the circuit is:
its health, its numbers (the transistors tile opens their breakdown), its
truth table and how it looks as a part. Unused components are a tab of
the Components list in the parts bar, with a delete button on each.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 15:12:43 +02:00
Fabian @ Blax Software 24a62c3601 R wiring: nothing over or under parts, cables as wide as drawn, clear bridges, cables that split, tidy every circuit
Parts are walls with a margin: a line only touches a part where it ends on
its pin. When the usual route and its alternatives are blocked, a search
of the grid around the parts finds the way. Cables count as wide as their
sleeve, so they keep clear of each other. A further wire or cable of a
signal branches off the lines already laid, and cables of one signal are
drawn as one that splits. At crossings the thinner line jumps over the
wider one, as wide as it needs (vertical ones sideways); cables hop with
every line inside. Tidy every circuit lays out all circuits in one go.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 14:57:16 +02:00
Fabian @ Blax Software 51d71e2564 A Shift while wiring: connect and go on from the same signal
Shift + click on a pin while a wire follows the mouse connects it and
keeps wiring from the same output, so one signal fans out to several
pins in a row; Esc or a plain click ends it. Started at an input, it goes
on from the output just wired to it. Letting go of a dragged wire with
Shift held does the same.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 13:11:19 +02:00
Fabian @ Blax Software 8300712a21 R bottom bar as wide as the top bar; Logic shows every gate; Space opens a search for parts and actions
The parts bar sits under the top bar at the same width, pinned parts on
the left (the wheel scrolls them when they do not fit), search on the
right. Logic lists NAND and every component drawn as a gate, pinned or
not. A tap on Space opens the search box at the mouse with the recent
parts and common actions (new component, find, truth table, fit, print,
…); Space held while dragging still moves the view.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 12:43:08 +02:00
Fabian @ Blax Software 97c650a2b8 BF inverted inputs: lamps and outputs show the inverted value, and checks read it
A bubble on a lamp or output pin now shows on it. The truth table, Check,
puzzle scores and gate detection read what an output puts out after its
bubble (they read the raw wire, so a bubble on an output was ignored), and
rows of an output panel count as outputs there (they always read 0).
Right-click on an input pin offers to invert it, for desktops that take
Alt+click for themselves.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 12:27:12 +02:00
Fabian @ Blax Software c1b70a937f R Panels: This and Pins on the left, the selection on the right
The left panel is about the circuit you are in: This (challenge and
Check on top, problems, name, statistics, truth table, as a component,
transistors, tools) and Pins. The selection gets its own panel on the
right, there only while something is selected, with its settings and
actions such as making a component out of it. The bars follow the
canvas width and drop labels when it gets narrow.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:38:17 +02:00
Fabian @ Blax Software 6e3405ae0c R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:17:41 +02:00
Fabian @ Blax Software 8de4a81678 A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways
- A project keeps connector types: a name, a colour and lines that run
  out -> in or back. Made, edited and deleted (once unused) from the
  parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
  on the inner side plus a cable pin to pass the whole cable on to a
  part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
  compiler joins line by line, forward and back, at every depth. Ports
  of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
  takes them out and in from the side they face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:59:56 +02:00
Fabian @ Blax Software c5b67ee7c1 R saves like a game: one save per project on every device, Load game in the menu, a pause menu, and a lean side panel
- Sync: when two devices changed the same project, the newer save wins
  everywhere and the other becomes a savegame of it (new endpoint to keep
  a savegame without replacing the save), never an "(other device)" copy.
  A first visit keeps its starter unsaved until something changes, and
  the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
  selected (or the project button) opens a pause menu: Resume, Save,
  Save as copy, Load, Settings, How to play, Main menu. The projects
  dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
  duplicate, unlink, delete, more = the right-click menu), only the
  settings that matter for the part; pins, component tools, keys, cable
  and panel options fold away and remember it. X/Y fields removed.
  The Circuit tab folds its component settings, transistor breakdown
  and tools the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:36:17 +02:00
Fabian @ Blax Software 794acad140 A finer component boxes, a regrouped parts list with keyboard search, a real green for wires and cables
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 06:48:42 +02:00
Fabian @ Blax Software 09f945d2c5 A output panels, and switches, buttons, clocks or lamps combined into one panel
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 14:38:59 +02:00
Fabian @ Blax Software 7a00546e63 A parts dropped from the list connect where they land, cable buttons beside a selected part's pins, a reload offer for new releases
- Dragging (or placing) a part onto pins: its free pins land on pins they can join, a square away is enough, green rings show where; dropped, it is placed and wired in one step (Alt: just place)
- A selected component, panel or hex display shows a cable button beside its outputs and its inputs: one click for a cable onto those pins (or pick S0–S3, all 5, ...)
- Cable from outputs (or into inputs) whose pins already have one wire each takes those wires into the cable instead of adding a second path
- An open tab notices a new release within a minute and offers a reload (work is saved)

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 14:21:40 +02:00
Fabian @ Blax Software deb94b9d61 BF input panels are component inputs, cable ends plug in more reliably; A merge panels, hex pass-through, design a component's box
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:49:29 +02:00
Fabian @ Blax Software 4d0e32d678 A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:26:59 +02:00
Fabian @ Blax Software f4e2c08658 A right-click menu for parts, wires and the canvas, "Wire them all to" as cards, plugged latches in plain greys
- Right click (or the menu key) shows what can be done with what is under the pointer: one part (open, rename, change to, inputs, colour, speed, panels, unpack, plug and unplug, cable colour), several parts (wire them all to with live preview, connect one by one, switches, change all, arrange, keep only, make a component), wires (bundle, colour, whole signal, straighten, remove cable) or empty canvas (paste here, add a part here, select all, fit, tidy, undo); right drag still moves the view
- "Wire them all to": a card per part, each fit a strip of its pins, and which wire goes where for the fit pointed at
- Plugged cable ends no longer look selected: grey connector, steel clips
- Icons named in menus are bundled for the browser too

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 12:33:30 +02:00
Fabian @ Blax Software 7ce8ffb9bc A wire a selection where it fits: green boxes over free pins in a row, and parts dropped onto a pin connect
- Select several lamps, output pins, switches or gates: every run of free pins they fit on (nearest parts first) shows as a green box; pointing along it picks the pins (S0+S1, S1+S2, ...) with a preview, a click wires them all top to bottom
- "Wire them all to" lists those fits, nearest first; the old pick-any-part stays under "Any part"
- Dragging a part so a free pin lands on (or a square from) a pin it can join shows a green ring and connects on drop; Alt places it without connecting
- A cable end only plugs in by itself when all its wires sit on the part; a name a part covers is hidden

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 12:16:26 +02:00
Fabian @ Blax Software 81a33b9b4b R slim cable ends: free ends are just their wires running into the ribbon, names only where nothing else shows them
- A free bundle or split has no box any more: each wire bends straight into its own lane of the cable, lit and coloured like the wire; a dashed outline shows on hover to grab it
- A wire's name shows next to a free end only when the part at the other end doesn't show it already (a switch or lamp of that name, a component pin)
- Names no longer widen a cable end, so its pins never move

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:59:17 +02:00
Fabian @ Blax Software 1741631ab0 A cable ends plug straight into parts and show their wire names, custom input panels with keys, colours and spacing
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:51:45 +02:00
Fabian @ Blax Software 4fddb8cd34 A one-click cable bundling with smarter placement, BF unlink keeps the cable
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
  the sources on their middle row, right before the targets on theirs, so
  the wires keep their flow; backwards wires get a backwards cable, and an
  end steps aside when a part is in the way. "Place the ends yourself…"
  (Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
  the cable between them stays.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:21:35 +02:00
Fabian @ Blax Software cf24578248 A box selection picks up the wires and cables it crosses
A box that touches no parts selects every wire it crosses, so dragging
across the wires between parts marks them for bundling. Right to left
(green box) selects everything touched, parts and wires; left to right over
parts keeps selecting only wires fully inside, so Delete stays safe.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:08:32 +02:00
Fabian @ Blax Software 29c32026d7 A cables you place yourself, drawn as coloured ribbons
- Select wires (or a box of parts and wires), "Bundle into cable…" or
  Ctrl+G, then click where the cable starts and where it ends, with a
  preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
  sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
  has its own colour in the cable and bundle/split settings. Wide cables
  are clickable across their width; the width mark sits above the ribbon.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:39:54 +02:00
Fabian @ Blax Software f1b72b3e3c BF pin names editable again, A dense Pins list with toggles and panel groups, wire many at once, folding side panels, full zoom-out
- Pins list rows used the class "pin", which the canvas styles as
  unclickable: renaming and focusing pins did nothing. Renamed the class.
- One line per entry; click the value to flip a switch, hold for a button;
  panel rows framed under their panel.
- Drag one wire from a selected part to another part: all selected parts
  connect to its next pins in order; "Wire them all to" in the bulk panel.
- Both side panels fold to an icon strip ([ and ]), remembered per browser.
- Zoom out until the whole circuit fits (further for bigger circuits); grid
  dots hide when they would be too dense.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:09:43 +02:00
Fabian @ Blax Software 74b257ce6e A right panel in tabs, Pins list, bulk editing, transistor breakdown, Settings dialog
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
  preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
  place (Enter goes to the next), number a whole side from a pattern, flag
  duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
  pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
  and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
  palette, and a per-part breakdown of the circuit. Test: the count equals
  4 x the gates the simulator builds, for every example and wide gate.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 09:29:55 +02:00
Fabian @ Blax Software acb9620b2b A dimmed names from the connected pin on switches, lamps and outputs
Parts without a hand-typed name show the name of the component pin they
are wired to, dimmed and in italics, live as the wiring changes;
automatic names are dimmed too. Typed names show as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:15:38 +02:00
Fabian @ Blax Software 5663685505 A compact tidy wiring, pass-through lamps and outputs, gates with up to 16 inputs
- Tidy wiring orders all wires entering one column together and lays
  them out as one compact staircase a grid step apart, sliding only
  within that gap to avoid running along other signals. Separate
  bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
  signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
  from the truth table) take 2 to 16 inputs. The wide version is a
  balanced tree of the two-input gate, so transistors count honestly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:09:23 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 9754ecc0b4 A transistor counts and records, cables, pixels and screens
- Every component shows its transistors (CMOS, 4 per NAND, at every
  depth) in the palette, its settings and the stats. Challenges keep
  the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
  with a width mark; "Bundle into cable" builds one from selected wires,
  "Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
  without gaps. New examples: Screen 4x4 and Demo: Screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:29:16 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00
Fabian @ Blax Software a241adc94e A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
  labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
  edits save to automatically, others get their own copy. Export, open a
  file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
  branch, double-click selects the whole signal, multi-select, arrow keys,
  colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
  as a volume on edgerealm.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 13:21:49 +02:00
Fabian @ Blax Software 03a4d55834 A logigate: NAND-only logic editor and simulator with components, challenges and examples
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 12:49:38 +02:00