A component with a challenge or puzzle solution anywhere inside stays
private, not only a challenge circuit itself, so wrapping a solution in a
part of its own no longer publishes it.
A campaign takes nothing from the library: Add and "Get version" are off
there, with a line saying why. A library part could be duplicated,
published again or taken apart into a solution, so a check on placing was
not enough.
Library marks come only from the entry being added. The server drops the
marks a publisher sends, and whether an entry is yours depends only on the
key this browser keeps for that project and component, so a part claiming
to be someone's entry can't be published over it.
The listing keeps pin counts and the first 16 pin names a side, short, and
a group of 40 characters at most, so it stays small whatever is sent.
"Get version" clears away what came along with the old version once
nothing else uses it, and the new parts take its names. Adding never
reuses another entry's component, so updating one entry leaves the others
as they were.
Wire corner points that aren't number pairs are dropped when a project,
link or library entry is read, so a circuit can always be drawn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
"Publish to the library…" in the menu on a circuit's name (or Space)
sends the component with every component it uses and their connector
types, under your leaderboard name. The server checks it like any
project, refuses what is missing, inside itself, nested too deep or too
big to run, and counts its transistors and pins itself. Publishing again
from the same browser makes the next version of the same entry; only that
browser holds the entry's key, so only it can update or remove it.
Challenge circuits and puzzle solutions stay private.
The Library (Components in the bottom bar, Space, the main menu) lists
every entry, newest first, searchable by name, description and author,
with a picture of its box, its transistors, pins and what comes along.
Add brings an entry into the open project and starts placing it: what the
project has in exactly that form already is used as it is, the rest comes
with new ids, a taken name gets a number, connector types join one with
the same lines. The This panel says where a component came from and
offers a newer version, which replaces it in place. A campaign only adds
what is built from parts it has earned, and its challenges take nothing
from the library.
Components keep an optional "from" mark; projects without it load and
compute as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The left panel is about the circuit you are in: This (challenge and
Check on top, problems, name, statistics, truth table, as a component,
transistors, tools) and Pins. The selection gets its own panel on the
right, there only while something is selected, with its settings and
actions such as making a component out of it. The bars follow the
canvas width and drop labels when it gets narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Bottom bar over the canvas: Logic, Inputs, Outputs, Wiring, Notes,
Connectors, Components (and search). Pointing at one opens its parts
above it: click to place, drag onto the canvas, pin to the left.
Connectors offer Out/In, edit and new type; components come grouped
with their transistor counts.
- Left panel: pinned parts first (NAND, AND, OR, NOT, XOR, input,
output, lamp, clock to start with; kept per browser, components by
name so they follow you into every project), then the circuits list.
The long list of built-in parts and the connector list moved to the
bar.
- Slimmer top bar and side panels; notices sit above the bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A project keeps connector types: a name, a colour and lines that run
out -> in or back. Made, edited and deleted (once unused) from the
parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
on the inner side plus a cable pin to pass the whole cable on to a
part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
compiler joins line by line, forward and back, at every depth. Ports
of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
takes them out and in from the side they face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Sync: when two devices changed the same project, the newer save wins
everywhere and the other becomes a savegame of it (new endpoint to keep
a savegame without replacing the save), never an "(other device)" copy.
A first visit keeps its starter unsaved until something changes, and
the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
selected (or the project button) opens a pause menu: Resume, Save,
Save as copy, Load, Settings, How to play, Main menu. The projects
dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
duplicate, unlink, delete, more = the right-click menu), only the
settings that matter for the part; pins, component tools, keys, cable
and panel options fold away and remember it. X/Y fields removed.
The Circuit tab folds its component settings, transistor breakdown
and tools the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
the sources on their middle row, right before the targets on theirs, so
the wires keep their flow; backwards wires get a backwards cable, and an
end steps aside when a part is in the way. "Place the ends yourself…"
(Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
the cable between them stays.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A box that touches no parts selects every wire it crosses, so dragging
across the wires between parts marks them for bundling. Right to left
(green box) selects everything touched, parts and wires; left to right over
parts keeps selecting only wires fully inside, so Delete stays safe.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Select wires (or a box of parts and wires), "Bundle into cable…" or
Ctrl+G, then click where the cable starts and where it ends, with a
preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
has its own colour in the cable and bundle/split settings. Wide cables
are clickable across their width; the width mark sits above the ribbon.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Pins list rows used the class "pin", which the canvas styles as
unclickable: renaming and focusing pins did nothing. Renamed the class.
- One line per entry; click the value to flip a switch, hold for a button;
panel rows framed under their panel.
- Drag one wire from a selected part to another part: all selected parts
connect to its next pins in order; "Wire them all to" in the bulk panel.
- Both side panels fold to an icon strip ([ and ]), remembered per browser.
- Zoom out until the whole circuit fits (further for bigger circuits); grid
dots hide when they would be too dense.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Parts without a hand-typed name show the name of the component pin they
are wired to, dimmed and in italics, live as the wiring changes;
automatic names are dimmed too. Typed names show as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Tidy wiring orders all wires entering one column together and lays
them out as one compact staircase a grid step apart, sliding only
within that gap to avoid running along other signals. Separate
bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
from the truth table) take 2 to 16 inputs. The wide version is a
balanced tree of the two-input gate, so transistors count honestly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Campaign projects start with NAND only; challenges open along a
dependency chain, each solution becomes a usable part, and basic parts
unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
The server re-runs the checks on submitted solutions, counts their
transistors and keeps each player's best; the board shows a histogram
and your place. A generated puzzle of the week for everyone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Writes go to a flushed temporary file and are renamed into place; the last
intact version stays as .bak and reads fall back to it, so a power cut
never leaves a damaged save. Same file format as before.
- Savegames per account project (newest 30, one per day for 90 days), kept
before restores and deletions; deleted projects restorable for 30 days.
Projects dialog: savegames per project and "Recently deleted".
- Daily gzip backup of data/ into backups/ (14 newest + monthly), restore
script scripts/restore-backup.mjs.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>