Commit Graph

9 Commits

Author SHA1 Message Date
Fabian @ Blax Software 87272ff555 R logic analyzer is a wired part: channels as input pins, waves on its box; dropped on a component it watches all its outputs. Drops the floating panel and Watch in analyzer
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-28 13:35:04 +01:00
Fabian @ Blax Software 0d6758c8c9 R test bench is a wired part: drive and check columns as pins, its table on the box with a run button, failing rows red, a click puts a row on the circuit; dropped on a component it wires itself to every pin; docked benches upgrade
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-28 13:30:07 +01:00
Fabian @ Blax Software 2be845030e A terminal and keyboard parts: text out on a rising WR (CLR clears), keys typed in waiting on D0-D7 with RDY, NEXT takes one
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-28 13:05:57 +01:00
Fabian @ Blax Software 1be913bd24 A ports on top of the box, split into lines to wire by hand
On a component's box every connector port now sits at the very top of its
side, above the single pins, in auto and hand-drawn boxes alike. A port
can be split on one placed component (its settings or right click: Split
… into lines): right below the socket the box then gets a pin per line,
named after the line, so lines can be wired by hand without an adapter.
Lines going into the component are inputs, lines coming out outputs, each
facing out of its side; a bar in the type's colour ties them to the
socket. A cable still plugs into the socket at the same time. Dropping a
single wire on a socket (or clicking one while connecting) splits the
port and takes the first free line that runs that way. Join … lines
takes the line pins and their wires away again, as one undo step.

A line wired by hand joins the same net the cable's line reaches inside;
a wire and a cable on one line both drive it, and the check says so.
Line pins are left out of the open-input warning, docked panels and
bubbles; docked panels no longer get a row for a port's socket either.
Saved as an optional list on the placed component (splitPorts); without
it a box only has its ports moved to the top.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:08:27 +01:00
Fabian @ Blax Software 09f945d2c5 A output panels, and switches, buttons, clocks or lamps combined into one panel
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 14:38:59 +02:00
Fabian @ Blax Software deb94b9d61 BF input panels are component inputs, cable ends plug in more reliably; A merge panels, hex pass-through, design a component's box
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:49:29 +02:00
Fabian @ Blax Software 4d0e32d678 A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:26:59 +02:00
Fabian @ Blax Software 1741631ab0 A cable ends plug straight into parts and show their wire names, custom input panels with keys, colours and spacing
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:51:45 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00