"Publish to the library…" in the menu on a circuit's name (or Space)
sends the component with every component it uses and their connector
types, under your leaderboard name. The server checks it like any
project, refuses what is missing, inside itself, nested too deep or too
big to run, and counts its transistors and pins itself. Publishing again
from the same browser makes the next version of the same entry; only that
browser holds the entry's key, so only it can update or remove it.
Challenge circuits and puzzle solutions stay private.
The Library (Components in the bottom bar, Space, the main menu) lists
every entry, newest first, searchable by name, description and author,
with a picture of its box, its transistors, pins and what comes along.
Add brings an entry into the open project and starts placing it: what the
project has in exactly that form already is used as it is, the rest comes
with new ids, a taken name gets a number, connector types join one with
the same lines. The This panel says where a component came from and
offers a newer version, which replaces it in place. A campaign only adds
what is built from parts it has earned, and its challenges take nothing
from the library.
Components keep an optional "from" mark; projects without it load and
compute as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Parts are walls with a margin: a line only touches a part where it ends on
its pin. When the usual route and its alternatives are blocked, a search
of the grid around the parts finds the way. Cables count as wide as their
sleeve, so they keep clear of each other. A further wire or cable of a
signal branches off the lines already laid, and cables of one signal are
drawn as one that splits. At crossings the thinner line jumps over the
wider one, as wide as it needs (vertical ones sideways); cables hop with
every line inside. Tidy every circuit lays out all circuits in one go.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Shift + click on a pin while a wire follows the mouse connects it and
keeps wiring from the same output, so one signal fans out to several
pins in a row; Esc or a plain click ends it. Started at an input, it goes
on from the output just wired to it. Letting go of a dragged wire with
Shift held does the same.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The parts bar sits under the top bar at the same width, pinned parts on
the left (the wheel scrolls them when they do not fit), search on the
right. Logic lists NAND and every component drawn as a gate, pinned or
not. A tap on Space opens the search box at the mouse with the recent
parts and common actions (new component, find, truth table, fit, print,
…); Space held while dragging still moves the view.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The left panel is about the circuit you are in: This (challenge and
Check on top, problems, name, statistics, truth table, as a component,
transistors, tools) and Pins. The selection gets its own panel on the
right, there only while something is selected, with its settings and
actions such as making a component out of it. The bars follow the
canvas width and drop labels when it gets narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Bottom bar over the canvas: Logic, Inputs, Outputs, Wiring, Notes,
Connectors, Components (and search). Pointing at one opens its parts
above it: click to place, drag onto the canvas, pin to the left.
Connectors offer Out/In, edit and new type; components come grouped
with their transistor counts.
- Left panel: pinned parts first (NAND, AND, OR, NOT, XOR, input,
output, lamp, clock to start with; kept per browser, components by
name so they follow you into every project), then the circuits list.
The long list of built-in parts and the connector list moved to the
bar.
- Slimmer top bar and side panels; notices sit above the bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A project keeps connector types: a name, a colour and lines that run
out -> in or back. Made, edited and deleted (once unused) from the
parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
on the inner side plus a cable pin to pass the whole cable on to a
part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
compiler joins line by line, forward and back, at every depth. Ports
of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
takes them out and in from the side they face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Sync: when two devices changed the same project, the newer save wins
everywhere and the other becomes a savegame of it (new endpoint to keep
a savegame without replacing the save), never an "(other device)" copy.
A first visit keeps its starter unsaved until something changes, and
the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
selected (or the project button) opens a pause menu: Resume, Save,
Save as copy, Load, Settings, How to play, Main menu. The projects
dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
duplicate, unlink, delete, more = the right-click menu), only the
settings that matter for the part; pins, component tools, keys, cable
and panel options fold away and remember it. X/Y fields removed.
The Circuit tab folds its component settings, transistor breakdown
and tools the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logigate opens on a title screen. Continue, Free play (your own projects),
Campaign (progress and what is next), Challenges (every challenge and the
puzzle of the week in one Challenges project), Leaderboard (the best ten of
this and earlier weeks, your place, your records), Settings. Arrow keys,
Enter and Esc work through it; links still open straight into the editor.
Players can name themselves on the leaderboards. The logo in the editor
leads back to the menu.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Dragging (or placing) a part onto pins: its free pins land on pins they can join, a square away is enough, green rings show where; dropped, it is placed and wired in one step (Alt: just place)
- A selected component, panel or hex display shows a cable button beside its outputs and its inputs: one click for a cable onto those pins (or pick S0–S3, all 5, ...)
- Cable from outputs (or into inputs) whose pins already have one wire each takes those wires into the cable instead of adding a second path
- An open tab notices a new release within a minute and offers a reload (work is saved)
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right click a component (or its settings): "Cable from outputs" / "Cable into inputs" with the pin groups it has (A0–A3, B0–B3, S0–S3) or all of them
- The cable end plugs onto those pins, the other end waits a few squares away with their names; drop it on the next part's pins and it plugs in there
- Also for input panels (rows out) and hex displays
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right click (or the menu key) shows what can be done with what is under the pointer: one part (open, rename, change to, inputs, colour, speed, panels, unpack, plug and unplug, cable colour), several parts (wire them all to with live preview, connect one by one, switches, change all, arrange, keep only, make a component), wires (bundle, colour, whole signal, straighten, remove cable) or empty canvas (paste here, add a part here, select all, fit, tidy, undo); right drag still moves the view
- "Wire them all to": a card per part, each fit a strip of its pins, and which wire goes where for the fit pointed at
- Plugged cable ends no longer look selected: grey connector, steel clips
- Icons named in menus are bundled for the browser too
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Select several lamps, output pins, switches or gates: every run of free pins they fit on (nearest parts first) shows as a green box; pointing along it picks the pins (S0+S1, S1+S2, ...) with a preview, a click wires them all top to bottom
- "Wire them all to" lists those fits, nearest first; the old pick-any-part stays under "Any part"
- Dragging a part so a free pin lands on (or a square from) a pin it can join shows a green ring and connects on drop; Alt places it without connecting
- A cable end only plugs in by itself when all its wires sit on the part; a name a part covers is hidden
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A box that touches no parts selects every wire it crosses, so dragging
across the wires between parts marks them for bundling. Right to left
(green box) selects everything touched, parts and wires; left to right over
parts keeps selecting only wires fully inside, so Delete stays safe.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>