Commit Graph

17 Commits

Author SHA1 Message Date
Fabian @ Blax Software 67e3d94d80 R a Figma-like workspace: a floating bottom bar of part kinds with flyouts, pinned parts on the left
- Bottom bar over the canvas: Logic, Inputs, Outputs, Wiring, Notes,
  Connectors, Components (and search). Pointing at one opens its parts
  above it: click to place, drag onto the canvas, pin to the left.
  Connectors offer Out/In, edit and new type; components come grouped
  with their transistor counts.
- Left panel: pinned parts first (NAND, AND, OR, NOT, XOR, input,
  output, lamp, clock to start with; kept per browser, components by
  name so they follow you into every project), then the circuits list.
  The long list of built-in parts and the connector list moved to the
  bar.
- Slimmer top bar and side panels; notices sit above the bar.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:04:43 +02:00
Fabian @ Blax Software 8de4a81678 A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways
- A project keeps connector types: a name, a colour and lines that run
  out -> in or back. Made, edited and deleted (once unused) from the
  parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
  on the inner side plus a cable pin to pass the whole cable on to a
  part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
  compiler joins line by line, forward and back, at every depth. Ports
  of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
  takes them out and in from the side they face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:59:56 +02:00
Fabian @ Blax Software c5b67ee7c1 R saves like a game: one save per project on every device, Load game in the menu, a pause menu, and a lean side panel
- Sync: when two devices changed the same project, the newer save wins
  everywhere and the other becomes a savegame of it (new endpoint to keep
  a savegame without replacing the save), never an "(other device)" copy.
  A first visit keeps its starter unsaved until something changes, and
  the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
  selected (or the project button) opens a pause menu: Resume, Save,
  Save as copy, Load, Settings, How to play, Main menu. The projects
  dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
  duplicate, unlink, delete, more = the right-click menu), only the
  settings that matter for the part; pins, component tools, keys, cable
  and panel options fold away and remember it. X/Y fields removed.
  The Circuit tab folds its component settings, transistor breakdown
  and tools the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:36:17 +02:00
Fabian @ Blax Software 4fddb8cd34 A one-click cable bundling with smarter placement, BF unlink keeps the cable
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
  the sources on their middle row, right before the targets on theirs, so
  the wires keep their flow; backwards wires get a backwards cable, and an
  end steps aside when a part is in the way. "Place the ends yourself…"
  (Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
  the cable between them stays.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:21:35 +02:00
Fabian @ Blax Software cf24578248 A box selection picks up the wires and cables it crosses
A box that touches no parts selects every wire it crosses, so dragging
across the wires between parts marks them for bundling. Right to left
(green box) selects everything touched, parts and wires; left to right over
parts keeps selecting only wires fully inside, so Delete stays safe.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:08:32 +02:00
Fabian @ Blax Software 29c32026d7 A cables you place yourself, drawn as coloured ribbons
- Select wires (or a box of parts and wires), "Bundle into cable…" or
  Ctrl+G, then click where the cable starts and where it ends, with a
  preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
  sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
  has its own colour in the cable and bundle/split settings. Wide cables
  are clickable across their width; the width mark sits above the ribbon.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:39:54 +02:00
Fabian @ Blax Software f1b72b3e3c BF pin names editable again, A dense Pins list with toggles and panel groups, wire many at once, folding side panels, full zoom-out
- Pins list rows used the class "pin", which the canvas styles as
  unclickable: renaming and focusing pins did nothing. Renamed the class.
- One line per entry; click the value to flip a switch, hold for a button;
  panel rows framed under their panel.
- Drag one wire from a selected part to another part: all selected parts
  connect to its next pins in order; "Wire them all to" in the bulk panel.
- Both side panels fold to an icon strip ([ and ]), remembered per browser.
- Zoom out until the whole circuit fits (further for bigger circuits); grid
  dots hide when they would be too dense.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:09:43 +02:00
Fabian @ Blax Software 74b257ce6e A right panel in tabs, Pins list, bulk editing, transistor breakdown, Settings dialog
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
  preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
  place (Enter goes to the next), number a whole side from a pattern, flag
  duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
  pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
  and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
  palette, and a per-part breakdown of the circuit. Test: the count equals
  4 x the gates the simulator builds, for every example and wide gate.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 09:29:55 +02:00
Fabian @ Blax Software acb9620b2b A dimmed names from the connected pin on switches, lamps and outputs
Parts without a hand-typed name show the name of the component pin they
are wired to, dimmed and in italics, live as the wiring changes;
automatic names are dimmed too. Typed names show as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:15:38 +02:00
Fabian @ Blax Software 5663685505 A compact tidy wiring, pass-through lamps and outputs, gates with up to 16 inputs
- Tidy wiring orders all wires entering one column together and lays
  them out as one compact staircase a grid step apart, sliding only
  within that gap to avoid running along other signals. Separate
  bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
  signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
  from the truth table) take 2 to 16 inputs. The wide version is a
  balanced tree of the two-input gate, so transistors count honestly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:09:23 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 9754ecc0b4 A transistor counts and records, cables, pixels and screens
- Every component shows its transistors (CMOS, 4 per NAND, at every
  depth) in the palette, its settings and the stats. Challenges keep
  the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
  with a width mark; "Bundle into cable" builds one from selected wires,
  "Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
  without gaps. New examples: Screen 4x4 and Demo: Screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:29:16 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 08b086a71e A crash-safe storage, savegames and daily backups
- Writes go to a flushed temporary file and are renamed into place; the last
  intact version stays as .bak and reads fall back to it, so a power cut
  never leaves a damaged save. Same file format as before.
- Savegames per account project (newest 30, one per day for 90 days), kept
  before restores and deletions; deleted projects restorable for 30 days.
  Projects dialog: savegames per project and "Recently deleted".
- Daily gzip backup of data/ into backups/ (14 newest + monthly), restore
  script scripts/restore-backup.mjs.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:20:55 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00
Fabian @ Blax Software a241adc94e A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
  labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
  edits save to automatically, others get their own copy. Export, open a
  file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
  branch, double-click selects the whole signal, multi-select, arrow keys,
  colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
  as a volume on edgerealm.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 13:21:49 +02:00
Fabian @ Blax Software 03a4d55834 A logigate: NAND-only logic editor and simulator with components, challenges and examples
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 12:49:38 +02:00