Commit Graph

10 Commits

Author SHA1 Message Date
Fabian @ Blax Software ad8f6897e0 A latch parts onto each other: pins touching, no wires, moving together
A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-23 15:34:36 +02:00
Fabian @ Blax Software 8de4a81678 A connector types of your own: HDMI, RJ45 or any bus, with out and in ports and one cable that carries every line both ways
- A project keeps connector types: a name, a colour and lines that run
  out -> in or back. Made, edited and deleted (once unused) from the
  parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
  on the inner side plus a cable pin to pass the whole cable on to a
  part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
  compiler joins line by line, forward and back, at every depth. Ports
  of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
  takes them out and in from the side they face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:59:56 +02:00
Fabian @ Blax Software 4d0e32d678 A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 13:26:59 +02:00
Fabian @ Blax Software 1741631ab0 A cable ends plug straight into parts and show their wire names, custom input panels with keys, colours and spacing
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:51:45 +02:00
Fabian @ Blax Software 4fddb8cd34 A one-click cable bundling with smarter placement, BF unlink keeps the cable
- "Bundle into cable" (Ctrl+G) places both ends itself again: right after
  the sources on their middle row, right before the targets on theirs, so
  the wires keep their flow; backwards wires get a backwards cable, and an
  end steps aside when a part is in the way. "Place the ends yourself…"
  (Ctrl+Shift+G) keeps the two-click placement.
- "Unlink all" on a bundle or split removes only the wires going in or out;
  the cable between them stays.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:21:35 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00
Fabian @ Blax Software a241adc94e A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
  labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
  edits save to automatically, others get their own copy. Export, open a
  file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
  branch, double-click selects the whole signal, multi-select, arrow keys,
  colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
  as a volume on edgerealm.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 13:21:49 +02:00
Fabian @ Blax Software 03a4d55834 A logigate: NAND-only logic editor and simulator with components, challenges and examples
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 12:49:38 +02:00