A part whose pins line up one for one with the pins it is wired to can
sit straight on them, like a display on a CPU's outputs or a switch on a
component's input. Drag it close (green rings show where) or choose
Latch onto in its menu or settings. It then moves with that part; drag it
away or Unlatch to let go. Parts whose shared pins already touch latch by
themselves, the smaller onto the larger. A pin that would touch another
without a wire keeps it from latching. A clamp marks the joint.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A project keeps connector types: a name, a colour and lines that run
out -> in or back. Made, edited and deleted (once unused) from the
parts list's new Connectors group and a connector dialog.
- "<type> out" and "<type> in" ports: inside a component a pin per line
on the inner side plus a cable pin to pass the whole cable on to a
part inside; on the component's box one port, coloured like its type.
- One cable joins an out port to an in port of the same type; the
compiler joins line by line, forward and back, at every depth. Ports
of different types never join; mismatched cables are pruned.
- Pins can face the other way (the inner pins of ports); the router
takes them out and in from the side they face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logigate opens on a title screen. Continue, Free play (your own projects),
Campaign (progress and what is next), Challenges (every challenge and the
puzzle of the week in one Challenges project), Leaderboard (the best ten of
this and earlier weeks, your place, your records), Settings. Arrow keys,
Enter and Esc work through it; links still open straight into the editor.
Players can name themselves on the leaderboards. The logo in the editor
leads back to the menu.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Tidy wiring orders all wires entering one column together and lays
them out as one compact staircase a grid step apart, sliding only
within that gap to avoid running along other signals. Separate
bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
from the truth table) take 2 to 16 inputs. The wide version is a
balanced tree of the two-input gate, so transistors count honestly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Campaign projects start with NAND only; challenges open along a
dependency chain, each solution becomes a usable part, and basic parts
unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
The server re-runs the checks on submitted solutions, counts their
transistors and keeps each player's best; the board shows a histogram
and your place. A generated puzzle of the week for everyone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>