- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Select wires (or a box of parts and wires), "Bundle into cable…" or
Ctrl+G, then click where the cable starts and where it ends, with a
preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
has its own colour in the cable and bundle/split settings. Wide cables
are clickable across their width; the width mark sits above the ribbon.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Tidy wiring orders all wires entering one column together and lays
them out as one compact staircase a grid step apart, sliding only
within that gap to avoid running along other signals. Separate
bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
from the truth table) take 2 to 16 inputs. The wide version is a
balanced tree of the two-input gate, so transistors count honestly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Campaign projects start with NAND only; challenges open along a
dependency chain, each solution becomes a usable part, and basic parts
unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
The server re-runs the checks on submitted solutions, counts their
transistors and keeps each player's best; the board shows a histogram
and your place. A generated puzzle of the week for everyone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>