What latches, flip-flops, registers and RAM built from NANDs hold is no
longer lost when you go into a component and come back, reload the page or
open the project on another computer. Leaving a circuit puts its bits in
the project, and opening it starts from them.
Only the gates on feedback loops can hold a bit, so only those that are 1
are kept, plus the clocks that are high: each node id once, each gate as
the path levels it shares with the gate before plus the rest. 1,024
flip-flops take about 30 KB. Restoring runs the gates in the order signals
flow, so the gates in front of a latch are right before it reads them;
gates that no longer exist after an edit are ignored.
The bits go with every save, file, share link and account upload. Between
saves (a clock running, a button pressed) they are put in this browser's
copy every 30 seconds and when the page is left, without counting as a
change: no sync, savegame or undo step of their own, and never over a save
made in another tab. Projects without them start from all zeros as before.
"Power off and on" in the menu on the circuit's name, or with Space,
starts the open circuit again from all zeros.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A jump is drawn once more over every line, so a cable that arches over
another is never hidden under it, whatever order they are drawn in. Cable
labels sit on the longest stretch no other line crosses.
The circuit's name in the top bar opens what can be done with it: tidy
its wires or every circuit's, design its box, duplicate, delete, print,
export SVG, publish as a puzzle. The This panel keeps what the circuit is:
its health, its numbers (the transistors tile opens their breakdown), its
truth table and how it looks as a part. Unused components are a tab of
the Components list in the parts bar, with a delete button on each.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The left panel is about the circuit you are in: This (challenge and
Check on top, problems, name, statistics, truth table, as a component,
transistors, tools) and Pins. The selection gets its own panel on the
right, there only while something is selected, with its settings and
actions such as making a component out of it. The bars follow the
canvas width and drop labels when it gets narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Sync: when two devices changed the same project, the newer save wins
everywhere and the other becomes a savegame of it (new endpoint to keep
a savegame without replacing the save), never an "(other device)" copy.
A first visit keeps its starter unsaved until something changes, and
the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
selected (or the project button) opens a pause menu: Resume, Save,
Save as copy, Load, Settings, How to play, Main menu. The projects
dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
duplicate, unlink, delete, more = the right-click menu), only the
settings that matter for the part; pins, component tools, keys, cable
and panel options fold away and remember it. X/Y fields removed.
The Circuit tab folds its component settings, transistor breakdown
and tools the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logigate opens on a title screen. Continue, Free play (your own projects),
Campaign (progress and what is next), Challenges (every challenge and the
puzzle of the week in one Challenges project), Leaderboard (the best ten of
this and earlier weeks, your place, your records), Settings. Arrow keys,
Enter and Esc work through it; links still open straight into the editor.
Players can name themselves on the leaderboards. The logo in the editor
leads back to the menu.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Campaign projects start with NAND only; challenges open along a
dependency chain, each solution becomes a usable part, and basic parts
unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
The server re-runs the checks on submitted solutions, counts their
transistors and keeps each player's best; the board shows a histogram
and your place. A generated puzzle of the week for everyone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>