Commit Graph

12 Commits

Author SHA1 Message Date
Fabian @ Blax Software 29c32026d7 A cables you place yourself, drawn as coloured ribbons
- Select wires (or a box of parts and wires), "Bundle into cable…" or
  Ctrl+G, then click where the cable starts and where it ends, with a
  preview; "place it for me" keeps the automatic placement.
- Up to 16 wires, a cable is a ribbon: one thin line per wire inside the
  sleeve, in that wire's colour, lit on its own.
- The sleeve starts neutral (no longer takes the first wire's colour) and
  has its own colour in the cable and bundle/split settings. Wide cables
  are clickable across their width; the width mark sits above the ribbon.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:39:54 +02:00
Fabian @ Blax Software 183edc784f BF tidy wiring laid a wire along another signal's row
When a target sat level with another wire's source (Y3 next to S2), the
column order counted that as free, and ties went to the leftmost column:
S3 stepped left of S2, its last run shared S2's row, and the overlap pass
pushed it onto a side lane with a jog before the pin. Now a shared row
costs more than a crossing, ties keep top-to-bottom order, and a tidy
route that would still run along another signal goes to the usual router.
Tests: the reported layout, and no shared lines in tidy mode for every
example circuit.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:31:13 +02:00
Fabian @ Blax Software f1b72b3e3c BF pin names editable again, A dense Pins list with toggles and panel groups, wire many at once, folding side panels, full zoom-out
- Pins list rows used the class "pin", which the canvas styles as
  unclickable: renaming and focusing pins did nothing. Renamed the class.
- One line per entry; click the value to flip a switch, hold for a button;
  panel rows framed under their panel.
- Drag one wire from a selected part to another part: all selected parts
  connect to its next pins in order; "Wire them all to" in the bulk panel.
- Both side panels fold to an icon strip ([ and ]), remembered per browser.
- Zoom out until the whole circuit fits (further for bigger circuits); grid
  dots hide when they would be too dense.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:09:43 +02:00
Fabian @ Blax Software 74b257ce6e A right panel in tabs, Pins list, bulk editing, transistor breakdown, Settings dialog
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
  preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
  place (Enter goes to the next), number a whole side from a pattern, flag
  duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
  pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
  and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
  palette, and a per-part breakdown of the circuit. Test: the count equals
  4 x the gates the simulator builds, for every example and wide gate.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 09:29:55 +02:00
Fabian @ Blax Software 5663685505 A compact tidy wiring, pass-through lamps and outputs, gates with up to 16 inputs
- Tidy wiring orders all wires entering one column together and lays
  them out as one compact staircase a grid step apart, sliding only
  within that gap to avoid running along other signals. Separate
  bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
  signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
  from the truth table) take 2 to 16 inputs. The wide version is a
  balanced tree of the two-input gate, so transistors count honestly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:09:23 +02:00
Fabian @ Blax Software 2edb458372 A campaign with unlocks, synthesised sound, puzzles and the puzzle of the week
- Campaign projects start with NAND only; challenges open along a
  dependency chain, each solution becomes a usable part, and basic parts
  unlock on the way. Locked parts and challenges say what opens them.
- Sound effects made with Web Audio: place, connect, switches, buttons,
  delete, clock ticks (opt-in), solve, fail, unlock, record. Mute and
  volume in the top bar and Display settings.
- Publish any circuit as a puzzle link; only its behaviour is shared.
  The server re-runs the checks on submitted solutions, counts their
  transistors and keeps each player's best; the board shows a histogram
  and your place. A generated puzzle of the week for everyone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:54:57 +02:00
Fabian @ Blax Software 9754ecc0b4 A transistor counts and records, cables, pixels and screens
- Every component shows its transistors (CMOS, 4 per NAND, at every
  depth) in the palette, its settings and the stats. Challenges keep
  the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
  with a width mark; "Bundle into cable" builds one from selected wires,
  "Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
  without gaps. New examples: Screen 4x4 and Demo: Screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:29:16 +02:00
Fabian @ Blax Software 861b161c8b A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
  panel" docks one to a component with a row per free input; it moves
  with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
  switches, lamps and pins take the name of the component pin they are
  wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
  free pin, click-then-click works, and "Connect one by one" (W) wires a
  selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
  per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
  highlighted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 19:17:25 +02:00
Fabian @ Blax Software 08b086a71e A crash-safe storage, savegames and daily backups
- Writes go to a flushed temporary file and are renamed into place; the last
  intact version stays as .bak and reads fall back to it, so a power cut
  never leaves a damaged save. Same file format as before.
- Savegames per account project (newest 30, one per day for 90 days), kept
  before restores and deletions; deleted projects restorable for 30 days.
  Projects dialog: savegames per project and "Recently deleted".
- Daily gzip backup of data/ into backups/ (14 newest + monthly), restore
  script scripts/restore-backup.mjs.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:20:55 +02:00
Fabian @ Blax Software 5e17826ba5 A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
  matching pins), clock frequency per clock, keyboard keys for switches and
  buttons, lamp/display colours, note sizes, component names on the canvas,
  position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
  columns or detours, remaining clashes go on separate lanes. Crossings drawn
  as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
  sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
  release a241adc must load and compute identically.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 13:09:37 +02:00
Fabian @ Blax Software a241adc94e A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
  labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
  edits save to automatically, others get their own copy. Export, open a
  file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
  branch, double-click selects the whole signal, multi-select, arrow keys,
  colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
  as a volume on edgerealm.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 13:21:49 +02:00
Fabian @ Blax Software 03a4d55834 A logigate: NAND-only logic editor and simulator with components, challenges and examples
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 12:49:38 +02:00