- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Output panel: a column of named lamps, each passing its signal on; inside a component its rows are output pins (or kept inside); "Attach output panel" docks one to a component's outputs
- Select switches, buttons and clocks: Combine into an input panel (names, states, keys and wires stay; spacing kept); "All rows" makes them all switches, buttons or clocks
- Select lamps or output pins: Combine into an output panel
- Unnamed panel rows take the name of the pin they are wired to; output panels merge like input panels; circuits that place this one keep their wires when pins move into a panel
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A free bundle or split has no box any more: each wire bends straight into its own lane of the cable, lit and coloured like the wire; a dashed outline shows on hover to grab it
- A wire's name shows next to a free end only when the part at the other end doesn't show it already (a switch or lamp of that name, a component pin)
- Names no longer widen a cable end, so its pins never move
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bundle or split whose wires all meet one part sits on its pins with a latch, moves with the part, and comes loose when dragged away; Ctrl+G plugs both ends in when it can
- Cable ends take the spacing of the pins they plug into, or a spacing you set
- Each wire of a cable carries a name (S0..S3, Cout), shown on free cable ends and as dimmed names on what they feed
- Bundles get "Attach input panel"; panel rows get a keyboard key, an on colour, space above and up/down order
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Parts without a hand-typed name show the name of the component pin they
are wired to, dimmed and in italics, live as the wiring changes;
automatic names are dimmed too. Typed names show as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Tidy wiring orders all wires entering one column together and lays
them out as one compact staircase a grid step apart, sliding only
within that gap to avoid running along other signals. Separate
bundles into the same part no longer cross each other.
- Lamps and output pins get a pin on the right that carries the same
signal on; labels move above when it is wired.
- AND, OR, XOR, NAND and NOR (built in, examples or your own, detected
from the truth table) take 2 to 16 inputs. The wide version is a
balanced tree of the two-input gate, so transistors count honestly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Every component shows its transistors (CMOS, 4 per NAND, at every
depth) in the palette, its settings and the stats. Challenges keep
the fewest transistors of a passing solution and announce new records.
- Cables: bundle and split parts carry 2 to 32 wires as one thick cable
with a width mark; "Bundle into cable" builds one from selected wires,
"Remove cable" takes it apart. Cable ends only join cable ends.
- Pixel part; pixels inside a component show on its box as one screen
without gaps. New examples: Screen 4x4 and Demo: Screen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Draw circuits from NAND gates, package them as components and reuse them.
Event-driven simulation runs live while drawing. IEC/ANSI symbols, truth
tables, 17 challenges, example library up to a 4-bit counter. Deploys to
edgerealm like autismus-spektrum (logicate.blax.at).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>