diff --git a/README.md b/README.md index 2b98693..ebfee1d 100644 --- a/README.md +++ b/README.md @@ -15,7 +15,7 @@ Nuxt 4 (client-only editor, `ssr: false`), Tailwind CSS v4, Lucide icons via `@n - Sound (speaker in the top bar; volume and clock ticks in Settings, the gear in the top bar): clicks for placing, wiring, switches and buttons, a tick per clock cycle up to 8 Hz (off by default), and jingles for a solve, a failed check, unlocks and new records. All synthesised with Web Audio, no sound files ([app/lib/audio.ts](app/lib/audio.ts)). - Transistors: every component shows how many it takes, counted as a CMOS NAND (4 transistors) per gate at every depth: in the palette, its settings and the circuit stats. Each challenge keeps your record, the fewest transistors of any passing solution, and says so when you beat it. - Cables: a bundle gathers 2 to 32 wires into one cable, a split fans it out again in the same order; one bundle can feed several splits. Select the wires (a box across them, or Shift + click) and press "Bundle into cable" or Ctrl+G: the cable starts right after the sources on their middle row and ends right before the targets on theirs, so the wires keep running as they did (backwards too); an end steps aside when another part is in the way. "Place the ends yourself…" (Ctrl+Shift+G) lets you click where it starts and ends, with a preview; Esc cancels. "Unlink all" on a bundle or split removes only the wires going in or out; the cable stays. Drag the bundle and split later to move the ends. Up to 16 wires, the cable is drawn as a ribbon: each wire is its own thin line inside, in its own colour, lit while it carries a 1. The sleeve starts neutral and gets its own colour (cable or bundle/split settings). "Remove cable" turns it back into single wires. A cable end only joins another cable end, and the cable shows its width. -- Connectors (your own HDMI, RJ45, buses): in the bottom bar's Connectors, "New connector type" makes one: a name, a colour, and lines that each run out → in or back (acknowledge, hot-plug, a receive pair). Each type gives two parts, " out" and " in". Inside a component, a port shows its lines as pins on its inner side (lines coming in are outputs, lines going out inputs) and has a cable pin at the top to hand the whole cable on to a part inside; on the component's box it is one port, in ports on the left, out ports on the right, drawn as a socket in the type's colour. One cable joins an out port to an in port of the same type and carries every line, forward and back; it is drawn as a sleeve in the type's colour with its name. Ports of different types never join, and a cable whose ends stop matching (a port changed type) is removed. Editing a type changes every port and cable of it; lines are matched by their place in the list. A type can only be deleted once no port uses it. +- Connectors (your own HDMI, RJ45, buses): in the bottom bar's Connectors, "New connector type" makes one: a name, a colour, and lines that each run out → in or back (acknowledge, hot-plug, a receive pair). Each type gives two parts, " out" and " in". Inside a component, a port shows its lines as pins on its inner side (lines coming in are outputs, lines going out inputs) and has a cable pin at the top to hand the whole cable on to a part inside; on the component's box it is one port at the very top of its side, in ports on the left, out ports on the right, drawn as a socket in the type's colour. "Split … into lines" (selection panel or right click on the component) gives that box a pin per line right below the socket, named after the line, to wire lines by hand without an adapter: lines going into the component are inputs, lines coming out outputs, and a cable still plugs into the socket. Dropping a single wire on a socket does the same and takes the first free line (with a cable in the socket, only a line coming out: the cable feeds the others). "Join … lines" takes the line pins and their wires away again. One cable joins an out port to an in port of the same type and carries every line, forward and back; it is drawn as a sleeve in the type's colour with its name. Ports of different types never join, and a cable whose ends stop matching (a port changed type) is removed. Editing a type changes every port and cable of it; lines are matched by their place in the list. A type can only be deleted once no port uses it. - Pixels and screens: a pixel is a one-grid square that lights at 1, in five colours. Inside a component all pixels show on its box as one screen without gaps (every column and row they sit on becomes one of the screen), so you build your own LCD; see "Screen 4×4" and "Demo: Screen". - Input panel: one part with a column of controls; each row is a switch, button or clock. "Attach input panel" on a placed component docks one to its left with a row per free input, lined up with the pins and named after them. A docked panel moves with its component, gets a row when the component gains an input and loses it when the pin goes; inputs that are wired elsewhere, and rows you remove, are left alone. Inside a component a switch row keeps its position and a button row is 0. - Automatic names: copies continue a series (D0 copied gives D1, D2; A gives B), and so does placing a new input or output after a numbered one. A switch, button, lamp or output pin without a name of its own (or with an automatic one) takes the name of the component pin it gets wired to, made unique (Cin, Cin2); a name typed by hand is kept. On the canvas, a switch, button, clock, lamp or output pin without a name typed by hand shows the name of the component pin it is wired to, dimmed and in italics (or its automatic name, also dimmed); the name follows the wiring as it changes. diff --git a/app/assets/css/main.css b/app/assets/css/main.css index 690fa0b..7c03662 100644 --- a/app/assets/css/main.css +++ b/app/assets/css/main.css @@ -4347,6 +4347,15 @@ table.board { pointer-events: none; } +/* A port split on a component's box: its lines hang off the socket. */ +.port-bar { + fill: none; + stroke-width: 2; + stroke-linecap: round; + opacity: 0.8; + pointer-events: none; +} + .wire.port-cable .cable-sleeve { stroke: var(--w-on, #8592a3); opacity: 0.9; diff --git a/app/components/editor/Canvas.vue b/app/components/editor/Canvas.vue index c0f3232..0fab540 100644 --- a/app/components/editor/Canvas.vue +++ b/app/components/editor/Canvas.vue @@ -1,5 +1,5 @@