2026-10-17 10:49:38 +00:00
< script setup lang = "ts" >
const ed = useEditor ( )
const SHORTCUTS : [ string , string ] [ ] = [
R saves like a game: one save per project on every device, Load game in the menu, a pause menu, and a lean side panel
- Sync: when two devices changed the same project, the newer save wins
everywhere and the other becomes a savegame of it (new endpoint to keep
a savegame without replacing the save), never an "(other device)" copy.
A first visit keeps its starter unsaved until something changes, and
the main menu waits for the account's saves before anything starts.
- Main menu: Load game lists every save. In the editor, Esc with nothing
selected (or the project button) opens a pause menu: Resume, Save,
Save as copy, Load, Settings, How to play, Main menu. The projects
dialog is gone.
- Selection tab: name and transistors on top, one icon row (open,
duplicate, unlink, delete, more = the right-click menu), only the
settings that matter for the part; pins, component tools, keys, cable
and panel options fold away and remember it. X/Y fields removed.
The Circuit tab folds its component settings, transistor breakdown
and tools the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 16:36:17 +00:00
[ 'Esc (nothing selected)' , 'Pause menu: save, save as copy, load, settings, main menu' ] ,
A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 11:09:37 +00:00
[ 'Click switch' , 'Flip an input between 0 and 1 (give it a keyboard key in its settings)' ] ,
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
[ 'Click anything' , 'Its settings appear in the side panel on the left: swap the part, clock speed, colours, keys, position' ] ,
A right panel in tabs, Pins list, bulk editing, transistor breakdown, Settings dialog
- Right panel tabs: Selection, Circuit, Pins, Test. Display and sound
preferences move to a Settings dialog (gear in the top bar).
- Pins tab: every input and output in pin order with live values; rename in
place (Enter goes to the next), number a whole side from a pattern, flag
duplicate names, centre the canvas on a part.
- Several selected parts: narrow by type, swap all, rename all from a
pattern, set switches to 0/1 or flip, shared colour/frequency/size, align
and spread.
- Transistors on every part (NAND 4, switches and lamps 0), NAND 4T in the
palette, and a per-part breakdown of the circuit. Test: the count equals
4 x the gates the simulator builds, for every example and wide gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 07:29:55 +00:00
[ 'Select several' , 'Change them all at once: swap, rename D0, D1, …, switch all to 0 or 1, line up' ] ,
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
[ 'Pins tab (side panel)' , 'Every input and output in one list: rename them one after another with Enter' ] ,
A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:17:25 +00:00
[ 'Drag from a pin' , 'Draw a wire to another pin; dropping it on a part uses that part’ s next free pin' ] ,
[ 'Click a pin, then another' , 'The same without holding the mouse button' ] ,
[ 'Select parts, then W' , 'Connect one by one: click where each of their pins goes, in order (Shift+W: their inputs)' ] ,
A component faces, project library with share links, fine-grained wire editing
- Lamps and hex displays inside a component show on its box with their
labels, lit by that instance's state; Counter 4 example shows its count.
- Several projects per browser; share links at /p/<id> that the creator's
edits save to automatically, others get their own copy. Export, open a
file as project, or add a file's components to the open project.
- Wires: drag any segment or corner, Alt+drag for a new bend, Ctrl+drag to
branch, double-click selects the whole signal, multi-select, arrow keys,
colour tags.
- Share-link API (POST/GET/PUT /api/p) on Nitro fs storage in data/, mounted
as a volume on edgerealm.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-17 11:21:49 +00:00
[ 'Drag a wire segment' , 'Move that segment; drag a corner square to move a bend' ] ,
[ 'Alt + drag a wire' , 'Pull a new bend out of it' ] ,
[ 'Ctrl + drag a wire' , 'Start a new wire from the same signal' ] ,
[ 'Double-click a wire' , 'Select the whole signal' ] ,
[ 'Shift + click' , 'Add parts or wires to the selection' ] ,
[ 'Arrow keys' , 'Move the selection one step (Shift: four)' ] ,
2026-10-17 10:49:38 +00:00
[ 'Double-click a component' , 'Open it and see inside' ] ,
2026-10-21 09:08:32 +00:00
[ 'Drag on empty space' , 'Select parts; across wires (no parts in the box) it selects every wire it crosses' ] ,
[ 'Drag right to left' , 'Select everything the box touches, parts and wires (green box)' ] ,
A right-click menu for parts, wires and the canvas, "Wire them all to" as cards, plugged latches in plain greys
- Right click (or the menu key) shows what can be done with what is under the pointer: one part (open, rename, change to, inputs, colour, speed, panels, unpack, plug and unplug, cable colour), several parts (wire them all to with live preview, connect one by one, switches, change all, arrange, keep only, make a component), wires (bundle, colour, whole signal, straighten, remove cable) or empty canvas (paste here, add a part here, select all, fit, tidy, undo); right drag still moves the view
- "Wire them all to": a card per part, each fit a strip of its pins, and which wire goes where for the fit pointed at
- Plugged cable ends no longer look selected: grey connector, steel clips
- Icons named in menus are bundled for the browser too
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 10:33:30 +00:00
[ 'Right click (or the menu key)' , 'Everything you can do with what is under the pointer or selected; on empty space: paste, add a part here' ] ,
2026-10-17 10:49:38 +00:00
[ 'Right or middle drag, Space + drag' , 'Move the view' ] ,
[ 'Mouse wheel' , 'Zoom' ] ,
2026-10-20 17:29:16 +00:00
[ 'N, I, O, L, B, C, H, T, P, X' , 'Place NAND, input, output, lamp, button, clock, hex display, note, input panel, pixel' ] ,
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
[ 'Bar at the bottom' , 'Point at a kind of part to see them all; click to place, drag onto the canvas, pin the ones you use most to the bar itself (right-click a pinned part to unpin it)' ] ,
[ 'Main (top bar)' , 'Back to the main circuit; the names after it lead back to each component you entered' ] ,
[ '[' , 'Hide or show the side panel' ] ,
R a Figma-like workspace: a floating bottom bar of part kinds with flyouts, pinned parts on the left
- Bottom bar over the canvas: Logic, Inputs, Outputs, Wiring, Notes,
Connectors, Components (and search). Pointing at one opens its parts
above it: click to place, drag onto the canvas, pin to the left.
Connectors offer Out/In, edit and new type; components come grouped
with their transistor counts.
- Left panel: pinned parts first (NAND, AND, OR, NOT, XOR, input,
output, lamp, clock to start with; kept per browser, components by
name so they follow you into every project), then the circuits list.
The long list of built-in parts and the connector list moved to the
bar.
- Slimmer top bar and side panels; notices sit above the bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:04:43 +00:00
[ 'Connectors (bottom bar)' , 'Make a cable type of your own (HDMI, RJ45): its lines; place its Out and In ports; one cable joins them' ] ,
2026-10-21 09:51:45 +00:00
[ 'Select wires, Ctrl+G' , 'Bundle them into one cable; an end whose wires all meet one part plugs straight into it' ] ,
2026-10-21 12:21:40 +00:00
[ 'Select a component, cable button beside its pins' , 'A cable plugged onto S0– S3 (or any group); drop its free end on the next part\'s pins' ] ,
[ 'Drag a part from the list onto pins' , 'It lands on them and connects (green rings show where); Alt just places it' ] ,
2026-10-21 09:51:45 +00:00
[ 'Drag a plugged cable end away' , 'Pull it out; drop its pins on a part\'s pins to plug it in again' ] ,
2026-10-21 10:16:26 +00:00
[ 'Drag a part onto a pin' , 'Connects there when dropped (a green ring shows where); hold Alt to just place it' ] ,
A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:26:59 +00:00
[ 'Drag a wire by its end' , 'Moves that end to another pin (grab it near the pin, or by the small circle)' ] ,
[ 'Drop a wire on a wire' , 'From an input: it taps that wire\'s signal. From an output: it feeds what that wire fed' ] ,
[ 'Alt + click an input pin' , 'Inverts it (a bubble); counted honestly as one NAND' ] ,
[ 'Send signal / Use signal' , 'Name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire' ] ,
[ 'Ctrl+F' , 'Find a part, signal or component in every circuit, and where a component is used' ] ,
A finer component boxes, a regrouped parts list with keyboard search, a real green for wires and cables
- Box designer: drag pins up or down to open gaps between groups; size (+/−) and turn (R) lamps, displays, screens and drawings; pixels belong to named screens, each placed on its own; displays of the components inside can be shown on the box (off unless ticked); a list of everything the box can show, each optional; the box grows to hold what it shows
- Lamps and displays deep inside placed components light up on the box
- Parts list: one search box for parts and components (letters in order match too), recently placed parts first, grouped Logic / Inputs / Outputs / Wiring / Notes, then components by group; groups fold away
- Keys: / searches the parts list (Enter starts placing), Shift+A or Ctrl+K adds a part at the mouse
- Wires and cables get a green; the default swatch shows grey, as the default really is
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-22 04:48:42 +00:00
[ 'Shift+A or Ctrl+K' , 'Add a part at the mouse: type a few letters, arrows to choose, Enter to place' ] ,
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
[ '/' , 'The same: find a part by name and place it' ] ,
A Loxone-style working aids: named signals, inverted inputs, a project check, values on cables, search, printable sheets; wire ends move by dragging
- Send signal / Use signal: name a signal (CLK, RESET) once and use it anywhere in the circuit without a wire; selecting one lights up all of them, a use with no sender shows dashed
- Inverted inputs: Alt + click an input (or the menu/settings) puts a bubble on it; it reads the signal inverted through one NAND, counted in every transistor total
- Check (Circuit tab): open inputs, parts that drive nothing, duplicate pin names, unsent or doubly sent signals, loops that never settle; click one to show it. Open inputs get an orange marker on the canvas. Components no other circuit uses are listed with a delete
- Cables show the number they carry (= 13 · 0x0D); hovering a wire tells where it runs and its value
- Ctrl+F finds parts, signals, panel rows, notes and components in every circuit, with where each component is used
- Ctrl+P prints the circuit as a sheet with a title block on white paper (or save as PDF); also as an SVG file
- + and − under a selected gate change its number of inputs; swaps keep bubbles in place
- Drag a wire by its end to move that end to another pin; drop a dragged wire on another wire to tap its signal or feed what it fed
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:26:59 +00:00
[ 'Ctrl+P' , 'Print the circuit as a sheet with a title block, or save it as PDF' ] ,
2026-10-21 12:38:59 +00:00
[ 'Select switches or buttons, Combine' , 'One input panel (all rows can become buttons); lamps or output pins combine into an output panel' ] ,
[ 'Select panels, Merge' , 'One panel with all their rows; inside a component input panel rows are inputs, output panel rows outputs' ] ,
BF input panels are component inputs, cable ends plug in more reliably; A merge panels, hex pass-through, design a component's box
- Inside a component, the switch and button rows of its input panels are now input pins (in order with the other inputs, named after the rows); "Rows are component inputs" can be turned off per panel to keep the old fixed switches
- Select input panels, Merge: one panel with all rows, spacing and wires kept; circuits that place this one keep their wires
- Cable ends plug in more often: bundling orders the wires by the part a side runs to, an end with only some wires on a part still plugs, an end placed by hand next to the pins plugs, and dragging an end near its part shows green rings and plugs it on drop
- Hex displays pass their four bits on (outputs on the right), so they can sit in the middle of a bus
- Design the box: move lamps, displays, the screen and the name on a component's box, draw lines, boxes, circles and text in six colours, size it, leave things off; every placed copy shows it
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 11:49:29 +00:00
[ 'Design the box (Circuit tab)' , 'Move lamps, displays and the name on a component\'s box, draw lines, boxes, circles and text' ] ,
2026-10-21 10:16:26 +00:00
[ 'Select several lamps, pins or switches' , 'Green boxes show free pins in a row they fit; point along one, click to wire them all' ] ,
2026-10-17 10:49:38 +00:00
[ 'Shift + click on canvas' , 'Keep placing the same part' ] ,
A input panels, automatic names, one-by-one wiring, tidy routing, truth table export
- Input panel part: rows of switches, buttons and clocks. "Attach input
panel" docks one to a component with a row per free input; it moves
with the component and follows its pins.
- Copies and new pins continue name series (D0 -> D1, A -> B); unnamed
switches, lamps and pins take the name of the component pin they are
wired to.
- Connecting: target pins are ringed, dropping on a part uses its next
free pin, click-then-click works, and "Connect one by one" (W) wires a
selection's pins in turn.
- Tidy wiring option and "Tidy all wires": sorted, evenly spaced columns
per gap, one trunk per signal, fewer crossings.
- Truth table full screen, CSV download, copy as Markdown, current row
highlighted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:17:25 +00:00
[ 'Ctrl+C, Ctrl+V, Ctrl+D' , 'Copy, paste, duplicate; names continue their series (D0 → D1)' ] ,
2026-10-17 10:49:38 +00:00
[ 'Delete' , 'Remove the selection' ] ,
[ 'Ctrl+Z, Ctrl+Shift+Z' , 'Undo, redo' ] ,
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
[ 'Logo (top left), Esc' , 'Pause menu: save, load, settings, back to the main menu. Your work is saved' ] ,
2026-10-17 10:49:38 +00:00
[ 'F' , 'Fit the circuit to the screen' ] ,
[ 'Enter' , 'Open the selected component' ] ,
]
function close ( ) {
ed . showHelp . value = false
try {
localStorage . setItem ( 'logigate:help-seen' , '1' )
} catch { }
}
< / script >
< template >
< div class = "modal-backdrop" @click.self ="close" >
< div class = "modal" role = "dialog" aria -labelledby = " help -title " >
< div class = "flex items-start justify-between gap-4" >
< h2 id = "help-title" > From one NAND gate to a computer < / h2 >
< button class = "tb-btn" title = "Close" @click ="close" > < Icon name = "lucide:x" class = "size-4" / > < / button >
< / div >
< ol class = "steps" >
< li >
< strong > NAND is the only gate . < / strong > Its output is 0 only when both inputs are 1. Everything else ( NOT , AND , OR , adders , memory ) can be built from it .
< / li >
< li >
< strong > Every circuit is a component . < / strong > Inputs and outputs you place inside a circuit become its pins . Place it in another circuit and it shows up as one block ; double - click to look inside .
< / li >
< li >
< strong > It runs while you draw . < / strong > Green wires carry a 1 , grey wires a 0. Flip switches , press buttons , or start the clock in the top bar .
< / li >
< li >
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
< strong > Try the challenges < / strong > ( top bar ) , or open the examples ( NOT up to a 4 - bit counter ) to see how each step is made of the previous one .
2026-10-17 10:49:38 +00:00
< / li >
< li >
R Top bar like the parts bar, no left panel
The parts panel on the left is gone: pinned parts sit at the start of the
bottom bar, components open from the pencil in its Components list (or a
double-click), examples load from there too. The side panel moved to the
left. The top bar floats across the whole width: menu with the project,
Main and the way into the open component instead of the circuit
selector, Challenges in a drop-down, clock, search, undo, settings,
share and account. / and the bar's search open quick add.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 18:17:41 +00:00
< strong > Select parts and press "Make component" < / strong > in the side panel to turn a piece of your drawing into a reusable block .
2026-10-17 10:49:38 +00:00
< / li >
< / ol >
< h3 > Controls < / h3 >
< dl class = "shortcuts" >
< template v-for ="[k, v] in SHORTCUTS" :key ="k" >
< dt > { { k } } < / dt >
< dd > { { v } } < / dd >
< / template >
< / dl >
A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 11:09:37 +00:00
< p class = "hint" > Your work is saved in this browser . Sign in ( top right ) to have it on every computer ; use Share to get a link or export a file . < / p >
2026-10-17 10:49:38 +00:00
< button class = "btn btn-primary mt-4" @click ="close" > Start building < / button >
< / div >
< / div >
< / template >