BF memory: a newer save brings its own bits, bits reach the account when you leave, room for them
A project that comes in with the same circuit open (a newer save from
another computer, a savegame restored in place, a shared link opened
again) now runs from the bits it brings. Before, the running circuit
went on with this computer's old bits and wrote them over the newer ones
at the next save, and a savegame could not undo Power off and on.
Bits changed only by buttons or a clock are sent to the account when the
page is hidden or closed, when you leave the project, and before signing
out, so they are no longer lost by "remove from this browser" and reach
the other computer. A running clock alone still sends nothing. Bits alone
keep the project's save time, so an edit saved on another computer wins
over them and they end up in its savegames.
What circuits hold has its own room of 500 KB per project on top of the
2 MB limit, in the browser, the account and share links. When it is full,
the circuits left longest ago start from 0; a circuit that holds more than
that on its own says so once. A project can no longer become too large to
load because of its memory.
A savegame opened as a copy saves the project it leaves first, like every
other way of switching projects.
Tests now run the editor itself (in a stand-in browser with an account
server) for going into components and back, reloads, two projects, other
computers, savegames, signing out and the room limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 17:44:43 +00:00
|
|
|
import { LIMITS, toProject } from '../../../../../app/lib/logic/project'
|
2026-10-20 11:20:55 +00:00
|
|
|
import type { CloudMeta } from '../../../../utils/accounts'
|
A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 11:09:37 +00:00
|
|
|
// Save a project to the account. `baseRev` is the revision the device last
|
|
|
|
|
// had; if another device saved in between, this answers 409 with the newer
|
|
|
|
|
// version's meta, unless `force` is set.
|
|
|
|
|
export default defineEventHandler(async event => {
|
|
|
|
|
rateLimit(event, 'save', 1200, 10 * 60_000)
|
|
|
|
|
const user = await requireUser(event)
|
|
|
|
|
const id = getRouterParam(event, 'id')
|
|
|
|
|
if (!isProjectId(id)) throw createError({ statusCode: 400, message: 'Bad project id' })
|
|
|
|
|
const raw = await readRawBody(event, 'utf8')
|
BF memory: a newer save brings its own bits, bits reach the account when you leave, room for them
A project that comes in with the same circuit open (a newer save from
another computer, a savegame restored in place, a shared link opened
again) now runs from the bits it brings. Before, the running circuit
went on with this computer's old bits and wrote them over the newer ones
at the next save, and a savegame could not undo Power off and on.
Bits changed only by buttons or a clock are sent to the account when the
page is hidden or closed, when you leave the project, and before signing
out, so they are no longer lost by "remove from this browser" and reach
the other computer. A running clock alone still sends nothing. Bits alone
keep the project's save time, so an edit saved on another computer wins
over them and they end up in its savegames.
What circuits hold has its own room of 500 KB per project on top of the
2 MB limit, in the browser, the account and share links. When it is full,
the circuits left longest ago start from 0; a circuit that holds more than
that on its own says so once. A project can no longer become too large to
load because of its memory.
A savegame opened as a copy saves the project it leaves first, like every
other way of switching projects.
Tests now run the editor itself (in a stand-in browser with an account
server) for going into components and back, reloads, two projects, other
computers, savegames, signing out and the room limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 17:44:43 +00:00
|
|
|
if (!raw || raw.length > 2_100_000 + LIMITS.state) throw createError({ statusCode: 413, message: 'Project too large' })
|
2026-10-20 11:20:55 +00:00
|
|
|
let body: { project?: unknown; baseRev?: unknown; force?: unknown; link?: unknown; snapshot?: unknown }
|
A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 11:09:37 +00:00
|
|
|
try {
|
|
|
|
|
body = JSON.parse(raw)
|
|
|
|
|
} catch {
|
|
|
|
|
throw createError({ statusCode: 400, message: 'Not valid JSON' })
|
|
|
|
|
}
|
|
|
|
|
let project
|
|
|
|
|
try {
|
|
|
|
|
project = toProject(body.project)
|
|
|
|
|
} catch (e) {
|
|
|
|
|
throw createError({ statusCode: 400, message: (e as Error).message })
|
|
|
|
|
}
|
|
|
|
|
const link = body.link as CloudMeta['link']
|
|
|
|
|
const cleanLink = link && isShareId(link.id) ? { id: link.id, ...(typeof link.key === 'string' ? { key: link.key } : {}) } : undefined
|
|
|
|
|
|
|
|
|
|
return withLock(user.id, async () => {
|
|
|
|
|
const index = await readIndex(user.id)
|
|
|
|
|
const existing = index.projects.find(p => p.id === id)
|
|
|
|
|
if (existing && existing.rev !== body.baseRev && body.force !== true) {
|
|
|
|
|
setResponseStatus(event, 409)
|
|
|
|
|
return { conflict: true, meta: existing }
|
|
|
|
|
}
|
|
|
|
|
if (!existing && index.projects.length >= MAX_PROJECTS) throw createError({ statusCode: 409, message: 'Too many projects in this account' })
|
|
|
|
|
const size = JSON.stringify(project).length
|
|
|
|
|
const others = index.projects.reduce((n, p) => n + (p.id === id ? 0 : (p.size ?? 0)), 0)
|
|
|
|
|
if (others + size > MAX_ACCOUNT_BYTES) throw createError({ statusCode: 413, message: 'Your account is full (100 MB). Delete some projects first.' })
|
|
|
|
|
const meta: CloudMeta = { id, name: project.name, updated: Date.now(), rev: (existing?.rev ?? 0) + 1, size }
|
|
|
|
|
if (cleanLink) meta.link = cleanLink
|
|
|
|
|
else if (existing?.link && body.link === undefined) meta.link = existing.link
|
2026-10-20 11:20:55 +00:00
|
|
|
// Savegame: keep the state this save replaces.
|
|
|
|
|
const previous = existing && (await readProject(user.id, id))
|
|
|
|
|
if (existing && previous) {
|
|
|
|
|
await keepVersion(user.id, id, { project: previous, rev: existing.rev, at: existing.updated, name: existing.name }, body.snapshot === true)
|
|
|
|
|
}
|
A settings for every part, overlap-free wiring with crossing styles, accounts with sync
- Clicking anything opens its settings: swap parts in place (wires stay on
matching pins), clock frequency per clock, keyboard keys for switches and
buttons, lamp/display colours, note sizes, component names on the canvas,
position, unlink all wires, unpack a component, make an independent copy.
- Wires of different signals never share a line: auto routes pick free
columns or detours, remaining clashes go on separate lanes. Crossings drawn
as bow, triangle, bridge, gap or plain.
- Accounts (email + scrypt password, httpOnly session) with two-way project
sync and conflict copies; per-account limits; cross-site writes refused.
- Compatibility suite: a project and both browser-storage layouts from
release a241adc must load and compute identically.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 11:09:37 +00:00
|
|
|
await accounts().setItem(projectKey(user.id, id), project)
|
|
|
|
|
index.projects = [meta, ...index.projects.filter(p => p.id !== id)]
|
|
|
|
|
index.deleted = index.deleted.filter(d => d.id !== id)
|
|
|
|
|
await writeIndex(user.id, index)
|
|
|
|
|
return { meta }
|
|
|
|
|
})
|
|
|
|
|
})
|